Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Los Angeles, CA
Chimney repair in Los Angeles is rarely about soot. Most of the chimneys we work on belong to 1920s Spanish Colonial homes and 1930s bungalows that haven’t seen a fire in decades. They’ve been capped, sealed, or simply forgotten, and the real problems are seismic stress, missing caps, pest intrusion, and unlined flues that have become fire and carbon monoxide paths. Causeway Chimney Sweep has served Los Angeles since 2015, and we approach every job with that reality in mind. Call (877) 500-2276 for an honest assessment.
Why Los Angeles Homes Are Different
Los Angeles sits on a warm, dry Mediterranean climate, and that changes everything about chimney work here. Most fireplaces go untouched for years, so instead of creosote buildup, we find flues packed with dust, palm debris, leaves, and rodent nests. The Santa Ana winds push fine ash and dirt down uncapped flues every fall, and those winds can turn a small chimney defect into a visible problem fast.
The housing stock tells the rest of the story. Dense early-20th-century neighborhoods like Echo Park, Boyle Heights, Mid-City, and Koreatown are full of 1910s to 1940s Spanish Colonial, Craftsman, and bungalow homes with original hand-stacked masonry chimneys. These flues were built unlined, and most were capped or sealed off decades ago. Newer construction in Los Angeles often has no chimney at all, or a factory-built flue hidden behind stucco. When you call a chimney company in Los Angeles, the technician needs to know the difference between a 1923 unlined masonry flue and a modern factory-built unit, because the repair path is completely different. We do.
Styles & brands we work with
Our Main Los Angeles Services
Two services account for most of the calls we take from Los Angeles homeowners: chimney sweeping for the flues that are still active, and dryer vent cleaning for the venting systems that quietly accumulate lint. Here’s what each involves in this city.
Chimney Sweep in Los Angeles
Chimney sweeping in Los Angeles is less about removing creosote and more about clearing out what the dry climate and wildlife leave behind. Dust, soot, palm fronds, bird nests, and rodent debris fill flues that haven’t been opened in years. We inspect the full venting path, remove the buildup, and check for the missing caps and pest entry points that are common in older Los Angeles neighborhoods. If you haven’t had your flue looked at since buying the house, you don’t know what’s in there. Learn more about Chimney Sweep in Los Angeles.
Dryer Vent Cleaning in Los Angeles
Dryer vents in Los Angeles run through tight attic spaces and long horizontal runs in older homes, and lint accumulates faster in the dry air. A restricted dryer vent means longer dry cycles, higher utility bills, and a documented fire hazard. We clean the full vent run from the dryer to the exterior termination, and we check for the kinked or crushed sections that show up often in mid-century construction. Your dryer vent is a venting system, not an afterthought. See the full scope at Dryer Vent Cleaning in Los Angeles.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Los Angeles
Chimney repair in Los Angeles means working on homes that have survived nearly a century of seismic activity. Post-1933 Long Beach earthquake-era construction left many chimneys leaning slightly away from the roofline, with loose brickwork that a standard city inspection won’t catch. The flues themselves are often unlined, which means the mortar joints have eroded and the interior is no longer a sealed venting path. That’s a carbon monoxide risk and a fire risk, and it’s exactly the kind of repair we handle in-house. From sweep to reline, we don’t refer this work elsewhere. If you need Chimney Repair, we’re equipped to do it with professional-grade materials, not hardware-store substitutes.
Chimney Cap Installation
Signs you need it
You hear birds or rodents in the chimney, see water staining on the ceiling near the fireplace, or notice debris accumulating inside the firebox.
What it costs in Los Angeles
Chimney cap installation in Los Angeles typically runs $350 – $650 depending on flue size and roof access.
How we do it
We measure the flue opening, install a stainless steel cap sized for your tile or metal liner, and secure it to the crown with mechanical fasteners rated for Santa Ana wind loads.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, missing entirely, or you can see daylight through holes from the ground.
What it costs in Los Angeles
Chimney cap replacement in Los Angeles typically costs $300 – $600 for a standard stainless steel unit.
How we do it
We remove the old cap, inspect the flue tile for damage, and install a replacement cap from Olympia Chimney or Copperfield that fits the existing crown without modification.
Chimney Liner Installation
Signs you need it
Your fireplace produces a smoky smell even when not in use, you see flaking mortar or tile pieces in the firebox, or an inspection reveals gaps in the original clay liner.
What it costs in Los Angeles
Chimney liner installation in Los Angeles typically ranges $1,800 – $4,500 for a full reline with a DuraFlex flexible stainless liner.
How we do it
We size the flue, drop a DuraFlex stainless liner down the existing masonry chase, insulate it where required, and terminate it with a proper cap and crown connection.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, damp drywall around the fireplace, or visible gaps in the metal where the chimney meets the roofline.
What it costs in Los Angeles
Chimney flashing repair in Los Angeles typically costs $400 – $900 depending on how much of the flashing needs replacement.
How we do it
We remove the failed flashing, cut new step and counter flashing from galvanized or copper stock, and seal the transition so rain from winter storms can’t find a path in.
What Chimney Repair Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Chimney cap installation | $350 – $650 |
| Chimney cap replacement | $300 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $400 – $900 |
Do I really need a new chimney liner in Los Angeles?
If your home was built before 1940 with an unlined masonry flue, yes, if you plan to use the fireplace or vent a gas appliance through it. Unlined flues leak heat and carbon monoxide into wall cavities. A DuraFlex reline restores the flue to a sealed, code-compliant venting path without rebuilding the chimney. Call (877) 500-2276 for an inspection.
How long does chimney repair take in Los Angeles?
Most cap and flashing repairs are done in one visit. A full liner installation usually takes one to two days depending on roof access and flue height. Santa Ana wind can delay roof work, so fall and winter scheduling fills first.
Brands We Service in Los Angeles
We specify brands by name because the materials matter. In Los Angeles we install and repair with DuraFlex liner systems, Olympia Chimney caps and crowns, and Copperfield flashing components. These are the same professional-grade lines specified by certified sweep associations. We keep common cap sizes and flashing stock on hand, which means most repairs don’t wait on a special order. See our brands for the full product range.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Chimney cap installation | $350 – $650 |
| Chimney cap replacement | $300 – $600 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $500 – $1,200 |
| Chimney sweep (standard) | $175 – $350 |
| Dryer vent cleaning | $125 – $275 |
| Chimney inspection (Level 1) | $150 – $250 |
Roof pitch and access are the two biggest price drivers in Los Angeles. Older hillside homes with steep tile roofs take longer to work on safely, and that shows up in the quote. Causeway Chimney Sweep gives a flat price before any work begins, so you’re not watching the clock.
Neighborhoods We Serve in Los Angeles
We work across the central Los Angeles basin and the older neighborhoods where masonry chimneys are common. Most of our calls come from ZIP codes 90005, 90006, 90007, and 90008, but we regularly schedule jobs in the surrounding areas. Our crews are in the field across these neighborhoods every week, and typical scheduling runs within five to seven business days depending on the season.
- Koreatown
- Echo Park
- Silver Lake
- Hollywood
- Mid-City
Service Area – Cities Near Los Angeles
Causeway Chimney Sweep serves the neighborhoods around Los Angeles as part of our regular service area. We work in Koreatown, CA where dense 1920s apartment buildings and single-family homes share aging masonry flues. We cover Echo Park, CA and the hillside bungalows that need careful roof access. In Silver Lake, CA we see a mix of original Spanish Colonial chimneys and mid-century venting. And we handle Hollywood, CA homes with the same flat-price, evidence-based approach.
Serving Los Angeles, CA — Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Los Angeles
Most inspections are scheduled within five to seven business days. Roof work can take a bit longer if Santa Ana winds are active, because we won’t compromise safety on a steep tile roof. Call (877) 500-2276 to check current availability for your ZIP code.
Most cap, flashing, and crown repairs don’t require a permit because they’re considered maintenance on an existing structure. Full chimney rebuilds or major structural changes do fall under city permitting. We’ll tell you before work starts if your job needs one.
Yes. Many older Los Angeles neighborhoods have HOA or historic district rules about what’s visible from the street. We work with those guidelines regularly, and we’ll match cap and flashing finishes to what your association requires. The goal is a repair that lasts and passes review the first time.
If you have a chimney or vent that needs an honest look, call Causeway Chimney Sweep at (877) 500-2276. We’ll tell you what you actually need, show you the evidence, and quote a flat price before we touch anything.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Tamika Freeman"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Grace Tran"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Greg Reed