Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Century City, CA
Chimney repair in Century City usually means working on a high-rise condominium’s fireplace and venting system, not a single-family house. The housing stock here is dominated by 1960s through 2000s residential towers like Century Towers and Alalev, where fireplaces are factory-built gas units or decorative wood-burning inserts. That changes everything about how we diagnose, access, and repair flue problems. If you need an honest assessment of your fireplace or venting system in Century City, call us at (877) 500-2276. Causeway Chimney Sweep has served Century City since 2015.
Why Century City Homes Are Different
Almost nobody in Century City has a traditional house with a brick chimney poking through a pitched roof. What we see instead are vertical communities: luxury condominium towers, mid-century low-rises, and office buildings clustered around Avenue of the Stars and Century Park East. A fireplace in one of these buildings is usually a factory-built gas unit with a metal flue running through a chase, sometimes shared with other units and often tied into a building-wide exhaust system.
The mild coastal climate means fireplaces get light, occasional use. That doesn’t mean the flues stay clean. The marine layer pushes moisture against rooftop terminations, and Santa Ana winds drive debris into caps and screens. A rarely used flue can accumulate soot, nesting material, and corrosion that goes unnoticed until a cold snap or a home sale inspection brings it to light. And access is the real variable: many towers in Century City have locked mechanical penthouses, and flue caps are frequently bundled or shared. A repair call often starts with coordination with building engineering and an HOA, not with a ladder.
That’s the Century City difference. We know how to work with building management, how to document what we find, and how to repair the actual appliance and venting path in front of us – not just guess at it.
Styles & brands we work with
Our Main Century City Services
Most Century City homeowners call us for one of two reasons: a fireplace that needs sweeping before it’s safe to burn, or a dryer vent that’s no longer moving air. Here’s what each looks like in Century City specifically.
Chimney Sweep in Century City
In a Century City tower, sweeping a chimney usually means cleaning a factory-built gas fireplace or a decorative wood-burning insert, then accessing the flue from the rooftop. High-rise flue caps collect debris and the coastal air leaves a film of soot and corrosion that builds even when the fireplace sits unused. We inspect the full path from firebox to cap, remove creosote and debris, and document condition with photos. Chimney Sweep in Century City
Dryer Vent Cleaning in Century City
Dryer vents in Century City condos run long, concealed paths through walls and ceilings to rooftop or sidewall terminations. That run collects lint far from the dryer itself, which is why many units have weak airflow even with a clean lint screen. The job is a full-system cleaning from the dryer connection to the exterior termination, verified by airflow testing. Dryer Vent Cleaning in Century City
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Century City
Chimney repair in Century City is almost never a masonry job. What we’re repairing in these towers is a metal flue, a prefabricated firebox, a damaged cap, or a failing connection in the venting path. The problem this service solves is a venting system that has stopped doing its job – letting combustion gases exit the building safely and keeping moisture and debris out. When we assess a chimney in Century City, we’re looking at how the flue was originally installed, how the building’s rooftop configuration affects it, and what material failure is actually causing the problem. That matters because the fix is different depending on whether you’re in a 1965 low-rise with an original metal flue or a 2005 high-rise with a factory-built system. The job falls under our Chimney Repair scope, and we handle everything from top-of-flue failures to firebox deterioration.
Chimney Cap Installation
Signs you need it
Water staining on the ceiling near the fireplace, visible rust on the existing cap from the rooftop, or evidence that birds or rodents have entered the flue all signal a missing or failed cap.
What it costs in Century City
Chimney cap installation in Century City typically runs $225 – $550, depending on the flue size and whether the cap is stock or custom-sized for an older high-rise termination.
How we do it
We measure the flue opening at the rooftop, specify a stainless or copper cap from Copperfield or Gelco to match the existing metal, install it with mechanical fasteners rather than adhesive, and photograph the finished termination.
Chimney Liner Installation
Signs you need it
A cracked clay tile liner, corroded metal flue, or gas appliance venting into a masonry chimney without a properly sized liner are all conditions that require a new liner.
What it costs in Century City
Chimney liner installation in Century City typically runs $2,800 – $6,000, with the range reflecting flue height, building access, and whether the liner is insulted or plain-wall DuraFlex.
How we do it
We size the liner to match the appliance and flue dimensions, run a DuraFlex flexible liner system through the existing flue, insulate where required, and connect the termination at the top with a proper cap and flashing.
What Chimney Repair Costs in Century City
| Item | Typical range in Century City |
|---|---|
| Chimney cap installation | $225 – $550 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney liner installation | $2,800 – $6,000 |
Do I really need a new liner, or can the old one be repaired?
Sometimes a liner can be repaired with the HeatShield resurfacing system, which we apply inside the existing flue to restore a smooth, insulated surface. If the liner has failed structurally, relining with DuraFlex is the correct fix. Call (877) 500-2276 for a camera inspection that shows you exactly what’s there.
How long does chimney repair take in a Century City condo?
Most cap installations and flashing repairs are done in a single rooftop visit, typically one to two hours. A full liner installation usually takes half a day to a full day, depending on the building’s access requirements. We’ll give you a clear schedule before we start.
Brands We Service in Century City
We work with professional chimney supply lines: DuraFlex liners, HeatShield resurfacing material, Gelco and Copperfield caps and terminations, and Famco venting components. We keep common cap sizes and flashing materials stocked, so most Century City repairs don’t wait on a parts order. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Century City, CA
| Service | Typical range in Century City |
|---|---|
| Chimney sweep (gas fireplace) | $149 – $250 |
| Chimney sweep (wood-burning insert) | $180 – $350 |
| Dryer vent cleaning | $125 – $300 |
| Chimney cap installation | $225 – $550 |
| Chimney cap replacement | $300 – $600 |
| Chimney liner installation | $2,800 – $6,000 |
| Chimney flashing repair | $350 – $1,200 |
| Chimney crown repair | $500 – $1,800 |
In Century City, the largest price variables are rooftop access and HOA coordination. Some buildings require a building engineer escort, a specific insurance certificate on file, or work scheduled outside common quiet hours. We quote an upfront price before any work begins, and that price doesn’t change unless we find something you haven’t approved.
Neighborhoods We Serve in Century City
We work throughout the 90067 ZIP code and the surrounding blocks. Most Century City work takes place in residential towers, so our scheduling usually flexes around building access windows rather than traffic. Typical response for a repair estimate is one to two business days.
- Century Towers
- Alalev condominiums
- Century Plaza residential towers
- Avenue of the Stars corridor
- Century Park East / Century Park West
Service Area – Cities Near Century City
Our service area extends beyond Century City into the neighboring Westside communities. We regularly work in Beverly Hills, CA, Culver City, CA, West Hollywood, CA, and Ladera Heights, CA. Building access and HOA requirements vary by city, but the inspection and repair process stays the same.
Serving Century City, CA — Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Century City
We typically schedule Century City estimates within one to two business days. Rooftop access may require building management coordination, so we confirm access before arriving. Call (877) 500-2276 and we’ll get you on the schedule.
Yes. We coordinate with building engineering and HOA rules as needed, and we can provide whatever documentation your building requires before rooftop work. We don’t cut through HOA procedures; we work with them.
We serve Century City and the surrounding Westside, including Beverly Hills, Culver City, West Hollywood, and Ladera Heights. If you’re a few blocks outside 90067, call (877) 500-2276 and we’ll confirm coverage.
If your fireplace or dryer vent needs an honest look in Century City, call Causeway Chimney Sweep at (877) 500-2276. We’ll schedule a time, coordinate with your building if needed, and show you what we find.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Century City Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Tara Mercer"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Cole Sutton"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Tamika Freeman