Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale usually comes down to two things: the age of the house and what the Santa Ana winds have done to the flue over fifty or sixty years. Most of the calls we run in the Rossmoor and northwest Glendale pockets are for cracked clay flue tiles, failed mortar crowns, or chimneys that were converted to gas years ago and never properly lined. Causeway Chimney Sweep has served Glendale since 2015, and the work here tends to be predictable once you know the housing stock. If you need a chimney repair quote, call us at (877) 500-2276.
Why Glendale Homes Are Different
Glendale sits in a foothills transition zone, and that matters more than most homeowners realize. The 1920s-1950s Spanish Colonial and Tudor homes in Rossmoor, Chevy Chase Canyon, and the northwest pocket around 91207 and 91208 were built with hand-laid clay flues and decorative tile caps. Those original flues were never designed to handle modern heating cycles, and six decades of thermal expansion have left a lot of them cracked or spalling. We see it constantly: hairline fractures in the flue tile that open up under heat, letting embers and carbon monoxide reach the framing.
The dry Santa Ana winds compound the problem. Glendale’s fire season runs year-round now, and the brush above the Verdugo and San Gabriel foothills stays tinder-dry from May through November. A chimney with cracked flue tile and no spark arrestor is not routine maintenance here. It is a wildfire exposure point. During red flag warnings, our repair schedule fills with homeowners who got a home-inspection flag or noticed tile fragments in the firebox and finally called. The other thing about Glendale is the gas conversion trend. A large share of the original fireplaces in 91206, 91207, and 91208 have been converted to gas log sets or sealed entirely. When that conversion happened without a proper liner, the masonry absorbs acidic condensate and deteriorates from the inside out. Homeowners mistake the resulting downdraft or smell for a dirty chimney, when the real issue is flue damage from a gas appliance that was never vented correctly.
Styles & brands we work with
Our Main Glendale Services
Two services account for most of the calls we run in Glendale: chimney sweeping in the fall and winter burning season, and dryer vent cleaning for the homes where lint buildup has become a performance problem. Here is what each involves locally.
Chimney Sweep in Glendale
Annual sweeping matters more here than in coastal LA because the burning season is compressed into a few cold months, and whatever creosote builds up sits in the flue through a long, dry summer. We run brushes sized to the older clay flues common in Rossmoor and the foothill streets, and we check for cracked tile sections while we work. A standard Glendale sweep includes the firebox, smoke chamber, flue, and a visual check of the cap and crown. See our Chimney Sweep in Glendale page for full details and local pricing.
Dryer Vent Cleaning in Glendale
Glendale’s older homes often have long, concealed dryer vent runs through walls or under floors, and those runs collect lint faster than the short, straight vents in newer construction. We clean the full run from the dryer connection to the exterior termination, remove the accumulated lint, and check the flap and duct connections. A clogged vent is not just a slowdown; it is a documented fire hazard. See our Dryer Vent Cleaning in Glendale page for what a full cleaning includes and what it costs in the city.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Glendale
Chimney repair in Glendale is rarely a single fix. The older Spanish Revival and Tudor homes in Rossmoor and the northwest pocket were built with hand-laid clay flue tiles and shallow ash pits, and after sixty or seventy years, those tiles crack under thermal stress. Add in the Santa Ana wind cycles and the number of fireplaces that were converted to gas without a proper liner, and most repair jobs involve two or three separate issues: a cracked flue, a compromised crown, and a cap that is missing or rusted through. Causeway Chimney Sweep handles the full repair arc, from Chimney Repair diagnostics to relining with DuraFlex systems when the damage is too deep for resurfacing.
Chimney Cap Installation
Signs you need it
You can see daylight through the top of the flue from inside the firebox, or you have found bird nesting material, water stains on the ceiling near the chimney, or rust flakes around the damper.
What it costs in Glendale
Chimney cap installation in Glendale typically runs $190 to $395, with the price driven by flue diameter, roof access, and whether we need to build a custom bracket for an older clay flue.
How we do it
We measure the flue opening, select a cap with the right mesh size for ember and bird protection, fit it with a sealed bracket, and secure it to the clay tile or crown so it will not shift in high wind.
Chimney Liner Installation
Signs you need it
You see flue tile fragments in the firebox, a smell of smoke or gas in the house after burning, or water staining on the interior walls beside the chimney.
What it costs in Glendale
Chimney liner installation in Glendale typically runs $2,300 to $4,800, and the final price depends on flue length, roof pitch, liner material, and whether the old tile has to be broken out first.
How we do it
We run a camera through the flue to confirm the extent of the damage, remove or prep the existing tile, install a properly sized liner from a professional line like DuraFlex, and seal the top and base connections.
Chimney Flashing Repair
Signs you need it
Water is staining the ceiling near the chimney after rain, the paint near the roofline is bubbling, or you see gaps or lifted metal where the chimney meets the roof.
What it costs in Glendale
Chimney flashing repair in Glendale typically runs $300 to $600, with the final number set by roof pitch and whether the existing flashing can be resealed or must be cut out and replaced.
How we do it
We remove or resecure the existing flashing, install fresh step and counter-flashing where needed, seal the joints with a high-temperature roofing sealant, and confirm the water path is redirected away from the chimney chase.
Chimney Crown Repair
Signs you need it
The concrete crown has visible cracks, chunks are missing from the top surface, or water is pooling on the crown instead of draining away from the flue.
What it costs in Glendale
Chimney crown repair in Glendale typically runs $350 to $850, depending on whether the crown can be resurfaced with a waterproofing layer or needs to be broken out and repoured.
How we do it
We clean and prep the existing crown, fill cracks and low spots, apply a bonded resurfacing material, and slope the finished surface so water drains away from the flue and cap.
What Chimney Repair Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $190 to $395 |
| Chimney flashing repair | $300 to $600 |
| Chimney crown repair | $350 to $850 |
Can you repair a chimney without pulling the whole thing down?
Yes, in most Glendale homes the original masonry is sound and only the flue liner, crown, cap, or flashing has failed. We repair at the component level and only recommend rebuild work when the brick or block structure itself is compromised.
Do I really need a new liner if my fireplace was converted to gas?
Often yes. Gas exhaust is cooler and more acidic than wood smoke, so it condenses on unlined clay tile and eats away at the masonry. A proper liner, sized for the appliance, protects the flue and routes exhaust out safely.
Brands We Service in Glendale
We install and service professional chimney product lines, not hardware-store substitutes. On Glendale jobs we regularly work with our brands, including DuraFlex liner systems, Olympia Chimney caps and dampers, and Famco venting components. Parts are stocked locally or sourced fast, so most repair jobs finish in a single visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep and inspection | $160 to $260 |
| Chimney cap installation | $190 to $395 |
| Chimney cap replacement | $210 to $410 |
| Chimney liner installation | $2,300 to $4,800 |
| Chimney flashing repair | $300 to $600 |
| Chimney crown repair | $350 to $850 |
| Dryer vent cleaning | $120 to $250 |
| Level 2 camera inspection | $200 to $400 |
Prices in Glendale push toward the higher end on older homes where roof access is steep, the flue runs long, or the existing tile has to be broken out before a liner goes in. We quote a firm price before starting, and the number we give you is the number on the invoice.
Neighborhoods We Serve in Glendale
We run calls across Glendale every week, and the work shifts by pocket. The older fireplaces cluster in the north and northwest, while the south side and downtown have more mid-century and newer builds with converted or prefab units. Here are the areas we see most often:
- Rossmoor
- Chevy Chase Canyon
- Verdugo Woodlands
- Adams Hill
- El Miradero
If you are in Glendale, we can usually get a technician out within a few days during the fall and winter season, and faster when a repair issue is urgent.
Service Area – Cities Near Glendale
We serve Glendale and the surrounding foothill communities from our base in Universal City. That includes Burbank, CA directly west, La Cañada Flintridge, CA up against the Verdugo Mountains, and the hillside neighborhoods of Echo Park, CA and Silver Lake, CA just south of the 134. Same crew, same material standards, same upfront pricing.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
Most Glendale repair calls are scheduled within two to five business days. If you have an active water leak or a disclosed flue crack during fire season, call us directly and we will do what we can to get a technician out sooner, especially in the foothill neighborhoods closest to wildfire risk.
Most component repairs like cap replacement, crown repair, and flashing work do not require a permit. A full liner installation or any structural rebuild may, depending on scope and the current Glendale building code. We can tell you what applies to your specific job before any work starts.
Yes. If you are scheduling a chimney sweep or repair and your dryer vent has not been cleaned in years, we can add the vent cleaning to the same appointment and handle both systems in one trip. Call (877) 500-2276 and we will price both upfront.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Amanda Hoffman"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Dev Reddy"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Dale Fletcher