Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Studio City
Dryer vent cleaning in Studio City typically costs $135 – $260 for a single-story home, and $175 – $320 when the vent runs through a hillside crawlspace or an old clay flue chase. Most jobs take 60 – 90 minutes once we’re on site. If you live in the hills south of Ventura Boulevard, your vent probably isn’t a simple flex duct: it may route through original 1920s – 1950s masonry work that a standard brush-out can actually damage. That’s the job we do differently. Call (877) 500-2276 and we’ll schedule directly, no call-center handoff.
Why Causeway Chimney Sweep Is Studio City’s Preferred Dryer Vent Cleaning Company
We’re a full-service venting company, which means the same crew that sweeps your fireplace chimney also cleans your dryer exhaust. For Studio City homes that share a chase between a dryer vent and an old masonry flue, that matters. A dryer-vent-only technician might not recognize spalling tile or a compromised mortar joint. We do, because we work inside clay flues and masonry stacks every week.
Noel Carrasco leads our field team, and he’s the person homeowners talk to when a vent has been “cleaned” before but still isn’t moving air. The brand lines we install and service, including Famco dryer vent components and HeatShield repair materials, are the same professional-grade products specified by chimney trade associations. Not box-store substitutions.
Studio City customers see us within a few business days of calling. We know the hillside subdivisions above Ventura Boulevard, the canyon roads off Laurel Canyon and Fryman, and the tighter access issues those homes present. We show up with the right ladder setup and a camera that goes into your vent, not just a brush.
You can read more about how our full team works on our Dryer Vent Cleaning page, which covers what the service includes and what a proper inspection looks like.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Studio City
Whole-System Dryer Vent Cleaning
We clean the full run: from the dryer’s exhaust collar, through the transition duct, and out to the termination point. In Studio City ranch homes on the flats near Tujunga Avenue and Colfax, a single-story vent typically runs 10 – 20 feet and clears quickly. Hillside Spanish-revivals above Ventura Boulevard often run 25 – 40 feet with bends, and those take longer. Every job includes a camera pass after cleaning so you can see the result.
Clogged Vent and Lint Blockage Removal
When your dryer takes two cycles to dry a load, or the exterior flap barely moves, that’s a restriction. We clear lint, bird debris, and the palm-frond fragments that Santa Ana winds push into exterior terminations. On several Studio City jobs this year, the blockage wasn’t lint at all. It was a disconnected joint inside an old chase. A brush would’ve left that in place. The camera caught it.
Damaged or Disconnected Vent Repair
Older Studio City homes often have foil flex vents that were installed decades ago and have since kinked, torn, or separated. We replace those runs with rigid metal or UL-listed semi-rigid Famco components, which are smoother inside and collect less lint. If your vent terminates through a stucco wall on a hillside, we also verify the termination cap is rodent-proofed.
Clay Flue Chase Dryer Vent Cleaning
This is where the older Studio City housing stock creates a genuinely different job. In many 1930s Spanish-revival and Tudor homes, the dryer vent borrows an original clay flue tile or masonry chase. We clean those carefully, with lower agitation and camera verification before and after. The goal is to remove lint without spalling already-fragile tile. If tile damage is present, we tell you and show you before recommending any repair path.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Studio City
We specify components by name. That means Famco termination caps, rigid exhaust runs, and backdraft dampers on the dryer vent side, and HeatShield or DuraFlex in Studio City when a masonry chase needs repair. Copperfield is one of the professional supply lines we source through, which matters because Studio City’s older homes often require components that a big-box store simply doesn’t stock. You’re getting trade-grade materials installed by people who understand what they’re attaching to, not generic flex from a shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Studio City Homes
- Vents routed through original clay flue chases. Many hillside homes south of Ventura Boulevard have dryer exhausts that run through masonry stacks built for fireplace venting, not appliance lint. Clay tile absorbs lint, and the roughened surface catches more. We see this constantly on Fryman, Laurel, and Coldwater Canyon streets.
- Santa Ana wind debris. The Cahuenga Pass funnels wind, and in fire season those winds carry palm fronds, seed pods, and dry leaves straight into unprotected exterior terminations. A cap that’s missing its screen becomes a debris collector.
- Rodent and bird nesting in exterior vents. Unused dryer vents in canyon-adjacent homes get claimed by birds and rats. We remove nests, clean the run, and install proper Famco terminations to prevent re-entry.
- Disconnected joints hidden inside wall or crawlspace chases. In mid-century ranch homes with crawlspace access, we frequently find separated pipe joints bleeding wet lint into the underfloor space. This isn’t visible from the laundry room, and it takes a camera to locate.
Pricing for Dryer Vent Cleaning in Studio City, CA
A standard single-story dryer vent cleaning in Studio City runs $135 – $220. For two-story homes or vents that run through a hillside crawlspace, plan on $175 – $260. Homes in the 91604 ZIP, especially those above Fryman Canyon and Laurel Canyon, often have longer vent runs and more elevation changes, which adds time but not surprise charges.
If the vent shares a masonry chase, we clean with a specialized approach and may bring in a second technician to protect the flue liner. That lands closer to $260 – $320. Add-on repair work, like replacing a damaged termination cap or a kinked foil run, is priced based on the components you choose, typically $35 – $90 for the part and a short labor window.
Key Takeaways:
- Single-story flat-area cleaning: $135 – $220
- Hillside or two-story homes: $175 – $260
- Clay flue chase cleaning (camera-first): $260 – $320
- Free estimate over the phone. Call (877) 500-2276.
We don’t charge by the inch, and we don’t add a “fuel surcharge” for Studio City. The price we quote is the price you pay unless we find something on camera that requires your decision first.
We Also Serve Cities Near Studio City
Our service map covers Studio City and the neighboring communities where the same older housing stock shows up: North Hollywood, Universal City, Sherman Oaks, and West Hollywood. If you’re in one of those cities and dealing with a slow dryer or a questionable vent setup, the same camera-first process applies.
Serving Studio City, CA — Our Local Coverage Area
We’re based in the Studio City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Studio City
Yes, and that’s exactly why we work camera-first. Clay flue tile from the 1930s – 1950s is often already spalling, and aggressive brushing will worsen it. We use low-agitation cleaning methods for these chases, verify with a camera before and after, and if we find tile damage, we show you the footage before recommending anything. This isn’t a standard dryer-vent job, and it shouldn’t be treated like one. Call (877) 500-2276 if you suspect your vent runs through an old chimney chase.
A routine dryer vent cleaning does not require a permit. However, hillside neighborhoods in 91604 fall inside LAFD’s Very High Fire Hazard Severity Zone, which has rules about spark arrestors on chimney caps and brush clearance around structural penetrations. If your dryer vent shares a masonry stack with a fireplace flue, the termination must not create a pathway for ember intrusion. We check that while we’re there, because insurance renewals in these zones sometimes ask for exactly that verification.
Once a year is the norm. Even light laundry use generates lint, and in Studio City’s dry climate the lint stays loose and airborne, which means it can accumulate in bends and joints quickly despite modest volume. If you’re in a hillside home with a long vent run, or you dry a lot of towels and bedding, every 12 months is still the baseline. If your drying times creep upward, call sooner at (877) 500-2276 and we’ll inspect before it becomes a hard clog.
Yes, and this is the part of our process we won’t skip. After cleaning, and again if we find damage, we run a camera through the full vent run and show you the live footage or stills. At a 1930s Spanish-revival off Fryman Road near Fryman Canyon, we found a dryer vent terminating in an old clay flue shared with a fireplace chase. The flue tile was spalling, and lint had fused to the cracked surface, cutting airflow to almost nothing. We showed the homeowner the exact blockage and the cracked tile before recommending a HeatShield liner repair and a dedicated dryer vent reroute. No work was proposed without them seeing the evidence. That’s our standard, not an upsell tactic.
We install and service Famco dryer vent components, including termination caps, backdraft dampers, and rigid exhaust sections. For masonry or liner repairs, we use HeatShield and DuraFlex systems. These are professional-grade lines from recognized chimney supply manufacturers, which matters in Studio City because the older construction often demands fittings that generic retail parts can’t properly address.
If your dryer is running long, your laundry room feels humid, or the exterior vent flap isn’t moving, call us at (877) 500-2276 for a free phone estimate. We work throughout Studio City, including the hillside streets above Ventura Boulevard and the flats around Ventura and Tujunga. The camera goes in. You see what we see. Then you decide.
Written by Noel Carrasco, Owner at Causeway Chimney Sweep, serving Dryer Vent Cleaning in Studio City and surrounding communities.