Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Hollywood
Dryer vent cleaning in Hollywood, CA typically costs $149 – $289 for a standard single-story home, and $189 – $349 when the vent run exits through a hillside wall or roofline in neighborhoods like the Hollywood Hills or Beachwood Canyon. Most jobs take 60 – 90 minutes, and we book within 3 – 5 business days, sooner before Santa Ana season. If your dryer is taking two cycles to dry a load or the exterior hood is packed with lint and palm frond debris, call us at (877) 500-2276. We know exactly what’s happening behind the stucco in 90028, and we’ll show you the problem with a camera before we fix it.
Why Causeway Chimney Sweep Is Hollywood’s Preferred Dryer Vent Cleaning Company
Hollywood homeowners call us because we treat a dryer vent as a venting system, not an afterthought. We’re not a handyman with a shop vac. Our techs work with professional-grade materials from Famco and Copperfield, the same lines specified by certified sweep associations, not commodity big-box substitutes. When a 1928 Spanish Colonial Revival off Hollyridge Drive has a crushed flex duct behind original stucco, we re-rig it with smooth-walled rigid pipe and a pest-resistant hood. When a hillside villa near Runyon Canyon has a hood packed with wind-driven debris, we don’t just clear the opening. We trace the entire run, check the wall boot, and verify airflow with a back-pressure reading at the dryer.
Noel Carrasco leads our crew, and he’s the one homeowners talk to when they want a straight answer about whether a vent can be cleaned or needs to be re-rigged. That matters in Hollywood, where the housing stock is old, the wind is real, and the stucco hides a lot. We’ve worked on 1920s and 1930s Craftsman bungalows in Spaulding Square, hillside villas above Franklin Avenue, and mid-century apartment buildings near Hollywood Boulevard. We know which runs clog fastest and why. Our customers in 90028 tend to find us after a lint scare or a dryer that won’t dry, and they stay because we show them the evidence on camera.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Hollywood
Dryer Vent Cleaning
Our Dryer Vent Cleaning team starts at the dryer and works to the termination hood, not the other way around. In Hollywood’s 90028 hillside homes, the hood is often packed with palm fronds, lint, and rodent nesting by the time we arrive. We clear the full run with a rotary brush system, then camera the line to confirm the wall is clean and the connections are intact. If we find a kinked section of foil flex behind old stucco, we tell you, and we show you the footage.
Dryer Vent Re-Rigging and Repair
Foil flex duct in 1920s – 30s Hollywood homes sags, kinks, and separates from the wall boot after decades of seismic settling. A lint-only cleaning never catches that. When we find crushed or disconnected duct, we pull the old run and re-rig with rigid or semi-rigid smooth-walled pipe. We use proper clamps and a pest-resistant termination hood, not tape and hope. This is the fix that actually solves the two-cycle drying problem.
Dryer Vent Hood Replacement
The Santa Ana winds that sweep through the Cahuenga Pass and rattle Hollywood hillside homes are brutal on exterior vent hoods. Cheap plastic louvers crack, bird screens tear, and the hood gaps open to wind-driven debris and rodents. We replace failed hoods with galvanized or stainless hoods rated for exterior exposure, fitted with pest-resistant screens that still allow proper airflow. This is a 20-minute fix during a cleaning that prevents a much worse problem later.
Dryer Vent Camera Inspection
Every cleaning we do in Hollywood includes a camera pass. We want to see the sidewall and confirm there’s no hidden separation, crushed section, or lint mat that a brush alone won’t remove. For older homes in the hills, particularly those rebuilt or patched after the 1994 Northridge earthquake, that camera pass is the difference between a clean vent and a fire risk you can’t see from the exterior. You get the images, not a verbal summary.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We specify by name because it matters what goes back into your wall. For dryer vent re-rigging and hood replacement, we use Famco termination hoods and Copperfield venting components, the same trade-level lines we carry for chimney and venting work. Hollywood homeowners with 1920s and 1930s homes don’t need a generic plastic hood from a hardware store aisle. They need a hood that holds up to Santa Ana wind and keeps rodents out. We stock what these older Hollywood houses actually need, so most repairs happen same-visit, not “we’ll order that part.”
Common Dryer Vent Cleaning Problems We See in Hollywood Homes
- Wind-driven debris packing the exterior hood. In hillside neighborhoods like the Oaks and Whitley Heights, Santa Ana winds drive palm fronds, leaves, and dust straight into exterior hoods. The hood packs shut, lint backs up into the run, and the dryer overheats long before the homeowner notices the clothes aren’t drying.
- Crushed or disconnected foil flex duct behind old stucco. Many 1920s and 1930s Spanish Colonial Revival homes still have original foil flex runs that have sagged, kinked, or pulled free of the wall boot after decades of small earthquakes. The vent run, not the dryer, is usually the fire risk.
- Seismic settling causing wall-penetration gaps. Houses near the Hollywood Fault and along the 101 corridor shift over time. When the wall boot separates from the penetration, warm lint-laden air dumps into the wall cavity. Winter rains wet the lint and turn it into a mat that blocks the run and smells like mildew.
- Rodent intrusion at the termination hood. Rats and mice follow the warm air and lint smell. A damaged hood is an open door into the vent run. We regularly pull nests out of Hollywood hillside vents, and the fix is always the same: a proper pest-resistant hood and a sealed wall boot.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Hollywood, CA
A standard dryer vent cleaning in Hollywood runs $149 – $289 depending on run length, access, and elevation. Hillside homes with long or hard-to-reach runs, anyone with a second-story wall exit, and older homes with known stucco repair work generally land at the higher end. A hood replacement adds $40 – $90 for the part depending on material, installed. A full re-rig for a crushed foil flex run, including rigid duct, fasteners, and a new termination hood, typically falls between $350 and $600. We give a flat price before we start, and we show you the camera evidence of what we found before recommending anything beyond the cleaning. Call (877) 500-2276 for a free estimate. Noel will walk you through what to expect in a 90028 hillside home versus a standard flatland bungalow.
We Also Serve Cities Near Hollywood
Our crews run throughout the Hollywood area, including Dryer Vent Cleaning in Hollywood proper, plus Universal City, West Hollywood, Koreatown, and Echo Park. If your home is in a neighboring zip, you’re still in our service area, and you’ll get the same materials-based approach we bring to every 90028 job.
Serving Hollywood, CA — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Hollywood
Hillside vents clog faster because the termination hood bears the full force of Santa Ana winds, plus everything the wind carries: palm fronds, leaf litter, dust, and rodent activity. Hoods that exit high on an exterior wall also serve as shelter for birds and rodents, which pack in nesting. When the hood is blocked, the entire run backs up with lint even though the dryer vent itself is clean. The fix is a pest-resistant hood rated for exterior exposure and a rigid run that doesn’t sag. Call (877) 500-2276 for an exact quote.
Yes, and this is where hiring a full-service venting company pays off. Our techs are chimney sweeps first. Once the dryer vent is clear, we’ll note simple but important things we see from the outside: displaced mortar at the chimney crown, a cracked flue tile visible from the top, a damper that no longer seats, or a chimney pot that’s shifted after recent seismic activity. We won’t sell you a chimney service you don’t need, but if we see something worth a Level 1 inspection, we’ll tell you plainly and you can book it. In Hollywood’s older hillside homes, this kind of combined visit saves time and gives you a real picture of the whole venting system.
Because a dryer vent is a venting system, not an afterthought, and it fails for the same reasons chimneys fail: debris, obstructed terminations, failed connections, and water intrusion. We specify by name on materials, we camera every run, and we understand airflow. The same discipline that goes into a Level 1 chimney inspection goes into a dryer vent cleaning. A generalist with a brush doesn’t measure back-pressure or know what a crushed wall boot looks like on camera. That’s why Dryer Vent Cleaning sits next to chimney sweeping and chimney repair in our service line.
Walk outside to the termination hood and look at it directly. Is the louvers moving freely or stuck open? Is there visible lint at the opening? Can you feel warm air passing when the dryer runs, or does the air feel weak and backpressure push it out around the door? Next, time a dry cycle. If a normal load takes longer than one full cycle, the run is obstructed somewhere. Don’t climb onto a stucco wall or pull the duct yourself to investigate; if the hood is packed, call us. We’ll camera the run and tell you what’s actually in there before we touch anything.
NFPA 211 covers chimneys, fireplaces, vents, and solid fuel burning appliances. Dryer exhaust ducts fall under the mechanical code and the manufacturer’s installation requirements, but the same principles of clearance, termination, and obstruction removal carry over. In practice, what matters for Hollywood homeowners is that your vent run is rigid or semi-rigid, properly connected, terminates outdoors, and moves the dryer’s full airflow. When we clean and re-rig a run, we verify that with a back-pressure reading, not a guess. Call (877) 500-2276 if you’re not sure what’s behind your stucco.
Contact Causeway Chimney Sweep in Hollywood
If your dryer is taking two cycles to dry a load, the hood outside is packed with debris, or you just moved into an older 90028 home and nobody’s touched the vent in years, call us. We serve all of Hollywood, from the flats near Hollywood Boulevard to the hillside canyons above Franklin Avenue, and we also handle Gelco repair in Hollywood. Noel Carrasco and the team at Causeway Chimney Sweep will show you the problem on camera, quote you a flat price, and fix it with professional-grade materials, not hardware-store substitutes. Call (877) 500-2276 for a free estimate today.
Written by Noel Carrasco, Owner at Causeway Chimney Sweep, serving Hollywood and the surrounding areas.